Enroll Now

THE BRONZE
CERTIFICATE OF EXCELLENCE

Use Australia's only standard for digital lighting control to your advantage.

Learn the fundamentals of DALI-2 & zencontrol in less than a day.

Enroll Now
Learn More

We've transformed our classroom-based training into an online course. Enroll now, learn from home, and start making serious money with zencontrol today.

Instant access to Learning Portal

Instant access to
Support

Test kits shipped within 5 business days

The ONLY Australian Standard For Lighting Control.

Digital Addressable Lighting Interface (DALI)

In Australia we have been installing DALI since the early 2000's. Usually paired with a third party PLC or control system like C-Bus, Dynalite or KNX. By simply wiring a 1.5mm twin signal cable between our light fittings and doing a little programming, DALI drivers could be individually controlled or programmed into switching groups without having to run more wires.

In 2020 Standards Australia adopted the 62386 suite of DALI standards. This allows switches, sensors and other devices to be connected to the same signal cable, making lighting control easier to install, more profitable and third-party systems redundant!

Why are you still installing legacy lighting control products?

 

Don't become complacent. Get up to speed on the latest
Australian standards.

DALI-2 is here to stay and if you are not installing zencontrol
already, you are falling behind.

Want to increase your chances of winning projects
by lowering the cost of your lighting control?

At Lumenation we know that you want to be a profitable contractor. In order to do that, you need some sort of an edge over the competition.

The problem is, finding the edge! Testing new products or learning new skills can be risky and time-consuming, often making it feel not worth the effort

We believe learning Lighting Control should be simple. We understand what its like to get your hands on a new product and not know where to start.

Which is why we created the Bronze Certificate of Excellence.

Here's how it works in 4 steps...
Step 1 : Enroll

Enroll in the Bronze Certificate of Excellence to start your lighting
control journey.

Step 2: Get Access

We send you an unwired zencontrol training kit and give you access to the Lumenation portal. The portal includes our step-by-step videos, that will take you from estimating a project all the way through to performing ongoing maintenance on your first completed job.

Step 3: Complete your first project


Once your kit arrives, you work through the course at your own pace, asking questions directly to our trainers in our weekly webinars, or directly via mobile, until you have landed and completed your first zencontrol project.

Step 4: Win more projects!

Once you have unlocked the secrets behind a profitable lighting control system, your journey begins. We will support you as you grow your business and become a valued member of the Lumen Nation community.

To get started, click the enroll button below. Don't waste another minute submitting uncompetitive lighting control proposals and start making serious money with zencontrol today.

Enroll Now

What Our Most Satisfied Member Says About Us

5.0

Even though I have prior experience with other lighting control products, the Lumenation Silver certificate of excellence course offered by Lumen Resources was a game-changer for me. Shaun, was thorough and knowledgeable and made the DALI-2 protocol and zencontrol products easy to understand and program. With the knowledge and experience gained through this course I now feel confident in my ability to quote, design and install zencontrol as a lighting control system. Thank you, Shaun and Lumen Resources.

Nathan Willis at DSM

5.0

I have been involved in lighting control for over 20 years. I recently had the opportunity to undertake training with Lumen Resources on the Zencontrol range of Dali2 lighting control products This is a game changer for the electrical industry. It is a long time since any lighting control system or product excited me, but Zencontrol did. The quality of the product, the development that has gone into this & the level of training provided is awesome. Shaun walked us through the system & explained everything thoroughly. He was patient & encouraging and has always been available to answer any additional questions. I'm looking forward to a long & beneficial relationship with Lumen Resources & Zencontrol . I'd encourage every other electrician to get on board. You won't regret it!

What Will I Learn?

The course itself is broken up into 15 modules, with several short video lessons in each. The modules are designed to take
you from having zero knowledge of DALI, all the way through to maintaining your first completed project. Here is a breakdown
on how the course is structured.

Modules 1 & 2

In these modules, you will learn the History of lighting control and why we started using DALI. You will learn the wiring rules, the terminology used, limitations of DALI and how the protocol has improved over the years.

Learn More
Modules 3 & 5

You will start module 3 by learning the steps involved in a lighting control project. You will learn how to quote a typical DALI-2 job, prepare your design, write a programming brief and wire up your test kit. By the end of Module 5 you will have already commissioned your first basic installation.

Learn More
Modules 6 & 12

In modules 6 through to 12 you will get a deeper understanding of the programming interfaces within the zencontrol cloud. You will learn all about Planview, the Home app and Gridview. You will unlock the logic engine of the system and open up the possibilities of what can be achieved with zencontrol.

Learn More
Modules 13 & 15

In the final modules we summarise everything you have learned. We review the project life cycle again and look at the most efficient way to run a project when you land one! You will learn how to perform maintenance on a site from the comfort of your home or office. When you are ready you can test your knowledge in the final assessment and obtain your Bronze certificate of excellence. By the end of module 15 you will have the confidence to tackle your first job!

Learn More

What is Included?

The Kit

Your training kit includes over $3,500 worth of components included, and everything you require to get your first small project up and running. A full break down of the components can be found in the FAQ's below.

The Course

The course itself is structured across 15 modules. Each module contains several video lessons, downloadable resources and short tests. The course is designed to take you from having zero knowledge of DALI, all the way through to designing and programming your first job!

The Online community

The Exclusive Bronze community will be full of classmates who will be undertaking the course with you. It is also where you can get access to the technical support team as you work through the course at your own pace.

You will also be invited into the Lumen Nation. This is the wider community of integrators already installing DALI-2 and zencontrol.

The Weekly webinars

Sometimes it is easier to ask a question to your trainer directly when you are working through the course. This is why we run weekly webinars so you can get access directly to the technical trainers behind the course. You can register for these sessions within the Exclusive Bronze community.

The Nurturing Program 

 

As part of The Nurturing Program, the Bronze course includes access to our Customer Success Team, who bring decades of combined experience across all aspects of lighting control systems—covering estimating, design, installation, programming, and ongoing support. This service is designed to ensure you feel confident delivering DALI-2 and zencontrol solutions.

So, how much does it cost?

 

Over $9,672 worth of value included!

  • Learn from start to finish how to estimate, design, install, program and maintain a zencontrol & DALI-2 project.
  • Gain access to step-by-step video tutorials, wiring diagrams and other resources directly in the portal.
  • Access the online Lumenation community, full of like minded experts in the industry.
  • Join our Nurturing Program, receive support from our customer success team on your first zencontrol jobs

Secure Your Spot
Course Price
$4,924.70
Test kits ship within 5 business days
Instant access to online portal to start learning
Over $9,672 worth of material and value

FAQ

Our Satisfaction Guarantee!

We are confident that you will love this course, and we want to make sure that you are completely satisfied with your purchase.

That's why we're offering a satisfaction guarantee that covers both the online course content and the equipment that we send you. 

When you purchase the course, you can watch the first 4 modules at your own pace. If, within 14 days of accessing the videos and receiving the equipment, you decide that this course isn't right for you, just let us know by contacting us at [email protected] or on 1300 943 233. 

We'll give you a full refund, no questions asked! 

All you need to do is return the equipment undamaged*.

This way, you can try the course risk-free and make sure it meets your expectations. We're confident that you'll find our course valuable and engaging, but if you don't, we'll make sure that you're not out of pocket. 

That's our satisfaction guarantee, and we stand behind it.

*Shipping at your own cost. After the 14-day guarantee expires, the course and hardware provided falls under Lumen Resources standard refund policy, terms and conditions.

Learn how your competitors generate upwards of $25,000 per month installing lighting control

Enroll Now